Skip to content

Pool Chlorine Calculator

Estimate a dose of liquid chlorine, household bleach, calcium hypochlorite, dichlor, or trichlor using your current and target free chlorine readings.

Example chlorine readings and dose. Enter your own readings and confirm the product strength before use.

Free Chlorine (FC) Readings (PPM)
Standard sanitizing baseline: 1.0 – 4.0 ppm
Standard daily target is 2.0 – 4.0 ppm (or higher for shock)
Select Chlorine Formulation

Example dose

50.5FL OZ

≈ 6.3 cups (1.49 Litres / 0.39 gal)

In US Cups6.3 cups
In Litres1.49 L
In Gallons0.39 gal
Target Increase+2.5 ppm FC

•Does not add cyanuric acid (stabilizer) or calcium to the water.

•Slightly elevates pH temporarily upon addition, but neutralizes as chlorine is consumed.

Pool Chemical Safety Guidelines

Pool chemical calculations are estimates. Verify your pool volume and test results, follow the product label, add chemicals separately, circulate the water as directed, and retest before making further adjustments.

Never mix chlorine products with acids or other pool chemicals. Mixing can release lethal toxic chlorine gas.

How to use the pool chlorine calculator

Measure your current free chlorine level and confirm the pool volume first. If you are unsure of the volume, use the pool volume calculator and verify the estimate where possible. Enter the current level, target level and volume in the fields shown. Select the chlorine product you plan to use, because liquid chlorine, cal-hypo and stabilized products have different strengths and side effects.

Read the calculated amount in the displayed unit and compare it with the concentration printed on your actual product. A label that gives a different available-chlorine percentage can change the dose. If the result seems surprising, recheck each entry before adding anything. The calculator addresses a specific increase in free chlorine; it does not measure how fast sunlight, swimmers or other conditions will consume chlorine afterward.

Follow the product label for handling, addition method and circulation. Keep swimmers out while adding chemicals, avoid mixing products together, and retest after the water has circulated. Make any further adjustment from the new test reading rather than assuming the first estimate landed exactly on target. For sodium hypochlorite only, the focused liquid chlorine calculator gives a simpler unit breakdown. If pH or alkalinity also needs attention, use the chemical calculator to review those readings separately.

How to Use a Pool Chlorine Calculator Safely

Related Pool Calculators

All Pool Tools

Frequently Asked Questions: Pool Chlorine

Free Chlorine (FC) is the active, unbonded sanitizer available in the water to kill bacteria and oxidize algae. Combined Chlorine (CC) is chlorine that has bound to nitrogen and ammonia waste (chloramines that cause strong chemical odor and eye burn). Total Chlorine (TC) is the sum of both: TC = FC + CC. When testing, you want FC between 2.0 and 4.0 ppm and CC as close to 0 ppm as possible.